Snapper Ignition Coils
Snapper ignition coils generate high-voltage spark essential for engine combustion across all Snapper mower engine types. Our ignition coil inventory includes Snapper mower ignition coils, replacement ignition coils, engine ignition coils, and spark ignition coils for Briggs & Stratton, Kohler, and Kawasaki engines. Snapper Spares stocks Snapper ignition coil assemblies in stock for walk-behind and zero-turn applications, with worldwide delivery on all ignition coil orders. These critical spark ignition components convert low battery voltage into thousands of volts required to jump spark plug gaps, ensuring reliable ignition timing that powers consistent engine operation.
Available Snapper Ignition Coils
Armature, Magneto
398811
Snapper
£52.30
Available
Ignition Coil Cp
157-79473-31
Snapper
--
View More
Ignition Coil
7044394YP
Snapper
--
View More
Ignition Coil & Cable Assy
MA05697AZ
Snapper
--
View More
Ignition Coil
261-79401-01
Snapper
--
View More
Ignition Coil. Compl.
261-79401-11
Snapper
--
View More
Ignition Coil
799523B
Snapper
--
View More
Ignition Coil Cp
157-79473-28
Snapper
--
View More
Ignition Coil Assembly
1903116
Snapper
--
View More
H Strp-09Ga 02.500 Coil P&O A1011Cs Tp B
415121019B
Snapper
--
View More
Decal, Recoil Housing (3.35 O.D.)
17304
Snapper
--
View More
H Strp-09Ga 04.312 Coil P&O A1011Cs Tp B
415121026V
Snapper
--
View More
Frequently Asked Questions
Will a bad kill switch damage my ignition coil?
Faulty kill switches creating constant grounds can prevent spark but won't damage coils; however, coils may appear defective when grounded circuits prevent spark generation. Always test coils with kill wire disconnected.
How do I know if my Snapper ignition coil is faulty?
Failing ignition coils cause hard starting, engine misfiring, sudden shutdowns after warming up, or complete no-spark conditions. Test using a spark tester between plug wire and plug; no visible blue spark indicates coil failure.
Why does my Snapper run for 20 minutes then quit?
Intermittent running followed by sudden shutdown typically indicates ignition coil breaking down when hot, losing ability to generate spark as internal insulation fails with heat. Replace coil as this heat-related failure worsens progressively.
Can I test a Snapper ignition coil with a multimeter?
Test primary winding resistance between coil terminals and secondary resistance from spark plug terminal to ground per service manual specifications. Disconnect kill wire during testing to eliminate false readings from grounded circuits.
What's the proper gap for Snapper ignition coils?
Set ignition coil air gap to manufacturer specifications (typically 0.010-0.012 inches) using feeler gauge or business card thickness between coil legs and flywheel magnets. Incorrect gaps prevent proper spark generation.