Snapper Blades & Cutting Parts
Snapper mower blades and cutting parts deliver clean, precise grass cutting across all Snapper equipment from Personal Pace walk-behinds to commercial Z Master zero-turns. Our comprehensive inventory includes Snapper lawn mower blades, replacement blades, and complete deck cutting parts for TimeCutter, Recycler, and TimeM aster models. Snapper Spares holds genuine Snapper replacement blades in stock, including high-lift, low-lift, and specialty cutting configurations, with worldwide shipping available on all orders. Whether you need standard cutting blades, deck housing components, or complete blade assemblies, our range covers all major Snapper model series to maintain optimal cutting performance throughout demanding mowing seasons for both residential and commercial applications.
Available Snapper Blades & Cutting Parts
Blade Engagement Lever
7059254YP
Snapper
£27.39
In Stock
Blade Adapter
703618
Snapper
£47.76
In Stock
R/H 40" Cutting Blade
1735809
Snapper
£72.96
In Stock
Blade 20.38 .1
1727478ASM
Snapper
£45.64
In Stock
L/H 40" Cutting Blade
1719736ASM
Snapper
£57.88
In Stock
L/H 40" Cutting Blade
1735793
Snapper
£72.96
In Stock
Blade
7026428BZYP
Snapper
£25.09
In Stock
Blade Set Screws
7090228SM
Snapper
£4.36
In Stock
Blade Holder
7037751BMYP
Snapper
£57.45
In Stock
Cutting Blade
7100640SM
Snapper
£22.00
In Stock
L/H Mulch Blade
1719624ASM
Snapper
£32.40
In Stock
R/H 40" Cutting Blade
1719737BMYP
Snapper
£48.27
In Stock
Frequently Asked Questions
What's the difference between high-lift and low-lift Snapper blades?
High-lift Snapper blades feature taller wings or sails at each end that create strong upward airflow for superior grass discharge and bagging performance by forcefully ejecting clippings through the chute, making them ideal for side-discharge operation or when collecting clippings in wet conditions. Low-lift blades have shorter sails that produce less vacuum and work better for mulching applications or mowing in sandy, dusty conditions where reduced airflow minimises debris circulation whilst still providing adequate cutting performance, and they typically run quieter with less power demand than high-lift designs.
What happens if I install a Snapper blade upside down?
Installing a Snapper blade upside down severely reduces cutting performance because the wings or sail at each blade end are designed to create upward lift that pulls grass upright before cutting, and when reversed these wings actually push grass down into the turf causing ragged cuts and poor mulching. The mower will run but produce terrible results with stringy uncut grass, excessive clumping, and potential scalping, whilst also placing unusual stress on the engine and spindle bearings due to improper airflow under the deck that affects both cutting action and cooling.
Can I sharpen Snapper blades myself or should I replace them?
You can safely sharpen Snapper blades several times using a file, bench grinder, or angle grinder provided you maintain the original blade angle around 30 degrees, remove equal amounts of metal from each end to preserve balance, and stop sharpening once the blade becomes noticeably thinner than original thickness or develops cracks near mounting holes. Professional sharpening services can also balance blades precisely using specialized equipment, but replacement becomes necessary when blades show bending, stress cracks, or have been sharpened so many times that insufficient metal remains to maintain structural strength during high-speed rotation.
How often should Snapper mower blades be replaced?
Snapper mower blades typically require replacement every one to two mowing seasons depending on usage intensity, though frequent sharpening can extend their life until the blade material becomes too thin or develops cracks that compromise structural integrity. Commercial operators mowing daily in sandy or abrasive conditions may need blade replacement every few months, whilst residential users on typical lawns can often use blades for multiple seasons with regular sharpening and proper maintenance to preserve the cutting edge and prevent dangerous metal fatigue.
Why does my Snapper mower vibrate excessively after blade replacement?
Excessive vibration after installing new Snapper blades typically indicates the blade is not properly balanced, with one end slightly heavier than the other causing wobble at high rotational speeds that stresses bearings and creates uncomfortable operation. This can result from manufacturing variations, damage during shipping, or improper sharpening if you ground more metal off one end than the other, and the solution involves checking balance by suspending the blade on a nail through its centre hole to see if one end drops, then carefully removing small amounts of metal from the heavy end until the blade rests horizontally.